Home LookingPoint Blog

Blog

In the first entry of this series, we looked at the high-level mechanics involved in using AnyConnect with the ISE Posture module to perform endpoint host inspection (posture) when connecting to an AnyConnect VPN head-end (ASA/FTD). In the second entry of this series, we narrowly focused on getting the ISE posture module provisioned. In the third entry, we took stock of all the available posture...

Continue reading

In the first entry of this series, we looked at the high-level mechanics involved in using AnyConnect with the ISE Posture module to perform endpoint host inspection (posture) when connecting to an AnyConnect VPN head-end (ASA/FTD). In the second entry of this series, we narrowly focused on getting the ISE posture module provisioned. If you haven’t check those out yet, please do, links below!

Continue reading

In the last entry of this series, we looked at the high-level mechanics involved in using AnyConnect with the ISE Posture module to perform endpoint host inspection (posture) when connecting to an AnyConnect VPN head-end (ASA/FTD). If you haven’t read that one yet, you can find it here!

In this entry, we will be narrowly focused on provisioning the ISE posture module. Enjoy!

Continue reading

Project Manager: “We need to give them access to our network.”

IT Security: “No.”

Project Manager: “We really need to give them access to our network.”

IT Security: “Still no.”

Project Manager: “C’mon, pleeease??”

IT Security: “Ok fine. But we’ll need to assess their computer for vulnerabilities.”

Continue reading
Aug 2

 

Platform requirements

The migration tool requires the following to run:

Continue reading
1