The countdown begins for Cisco Live 2019 in San Diego! We are super excited to see all that Cisco will be presenting and introducing to us. We thought that we would give you our top picks of sessions to attend during this jam packed, awesome week!
Two years ago Cisco introduced the Catalyst 9000 series switches as the next generation of campus switches. Every Catalyst switch family had an equivalent 9K to replace it; the 3800s were replaced with the 9300, the 4500s were replaced with the 9500, and the long standing 6500 chassis switches were replaced with the 9400. Cisco was consolidating all Catalyst switches into the 9000 series, well all but one. It seemed, at the time, that the wildly successful Catalyst 2000 series switch was spared from the chopping block as there was no comparable 9K. Enter the 9200!
As IT consultants in the Bay Area, we see a lot of startups. Small businesses with bold ideas filled with hard working people focused on achieving a specific goal. Usually in their infancy, these businesses focus all their time and money on the goal they are trying to achieve and usually don’t have the dedicated staff needed to support enterprise IT solutions. The employees are extremely sharp and very tech savvy, able to quickly piece together solutions to fit their needs that actually work pretty well. Ran out of ports on a switch? Order an inexpensive PoE switch and start daisy chaining them! More ports = problem solved. Same goes for wireless, if you have a dead spot, just get another AP. If you want video in a conference room, get some 3rd party camera to work with Google Hangouts.
Tomorrow is Valentine’s Day and while most of us are planning a special day with our special someone, here at LookingPoint we are thinking more about the technologies we are loving most this year! We want to share the love with our customers and blog subscribers, so we’re sharing the love with this list of the 5 enterprise technologies you are bound to fall in love with this year (if you haven’t already)!
This blog follows on from my last post and continues the discussion on how to integrate a single/pair of SD-WAN routers into our existing branch site topology. If you missed that last blog, then you can check it out here. Don’t worry I’ll be right here waiting for you.
In this edition of our SD-WAN series I’m going to take a step away from our lab environment and attempt to address a question I get a lot from our customers. “How do we integrate a SD-WAN router or pair of SD-WAN routers into our current environment?” Well the answer I’m afraid is the networking consultants classic line of “It depends”. And it really does, Cisco’s SD-WAN solution was created by engineers with a background in routing and this routing foundation really gives us a lot of flexibility when positioning our SD-WAN routers into our existing environment.
Technology is constantly moving and advancing, and as we continue to innovate we are able to use different enterprise technologies to grow our business. Technology used to be a means to help operate the business but has transformed into a means to better the business beyond those day-to-day operations. Technology is connecting our teams, connecting us with our customers and helping us to serve those customers more efficiently.
In my last post we looked at the steps that a vEdge goes through to bring up its control plane connections and authenticate itself onto the fabric. In this post we will follow on from where we left off and see how we use these control plane connections to exchange topology information, WAN policies and security keys via OMP.
Hello, my loyal blog post readers, in this my third installment of our SD-WAN series I am going to walk you through how our vEdge router locates, communicates and authenticates itself onto our SD-WAN fabric. Along the way we will take a look at a few packets captures and command line output to see what is going on under the hood.
In my last post in the series I introduced you to the four architectural components that control and enable our SD-WAN fabric. In that post I had promised that in our next installment we would take a closer look at our fabric bring up sequence, but if you will indulge me I would like to hold off on that topic for the next post. In its place I would like to use this post to introduce you to the lab environment that I have built for this series and take you through the process of deploying and registering a virtual vEdge router into our lab.
Subscribe to the informative Newsletter to be Notified Updates in the Technology world.