Home LookingPoint Blog

Blog

Recently I captured a Wi-Fi survey for a customer. While looking at the data in Ekahau. I noticed a small area that had lower data rate than the rest of the building. While trying to figure out why I checked the normal suspects like signal strength, noise, signal to noise ratio, co-channel interference, and channel width. The data from these categories all looked good and there was no clear...

Continue reading

Cisco Meraki firmware upgrades allow network administrators to utilize the latest features and security enhancements on Meraki devices. With MS Switches, you have an option to configure Staged Upgrade. Staged upgrade is only available for switches within the same network.

Continue reading

Cisco Meraki recently introduced the MG series Cellular Gateways to be a reliable solution as a backup internet uplink. In the event that the primary internet uplink goes down, the MG gateway will provide high availability for internet connectivity via wireless WAN connectivity using a cellular network. The MG Series also simplifies configuration and management using Meraki’s dashboard.

Continue reading

You read that right! At Cisco Live this year they introduced the ability to add Catalyst switches to the Meraki dashboard. Finally a use for the unused DNA licenses! The switches are monitored in read-only mode, so you still need to manage the switches the old fashioned way, however Meraki's traffic analysis and troubleshooting tools are available for use. This is great for Catalyst owners who do...

Continue reading

The Meraki dashboard is phenomenal in my opinion. With next to no effort on your part, you have a LOT of data at your fingertips. What if you want that data available for easy export, or if you want to access data older than 30 days old? I ran into just that scenario and found that on top of the GUI, Meraki provides a pretty fantastic API with access to even MORE data. Let me show you how to...

Continue reading
Nov 13
Meraki SD-WAN
Posted by Rick Wong

If you have Meraki MX security appliances chances are that you have seen the SD-WAN & traffic shaping option in the Meraki dashboard menu. Software-defined WAN (SD-WAN) can dynamically optimize your WAN without having to make manual adjustments when network conditions change. In a network with redundant uplinks if one uplink becomes degraded, SD-WAN allows the network to dynamically select the...

Continue reading

As IT consultants in the Bay Area, we see a lot of startups. Small businesses with bold ideas filled with hard working people focused on achieving a specific goal. Usually in their infancy, these businesses focus all their time and money on the goal they are trying to achieve and usually don’t have the dedicated staff needed to support enterprise IT solutions. The employees are extremely sharp...

Continue reading

Cloud networking deployments are meant to be simple, scalable, and effective. In this Fireside Chat LookingPoint CEO, Sean Barr, sits down with Network Engineer, Trevor Butler, to discuss cloud networking deployments, specifically our experience deploying Cisco Meraki into the network.

Continue reading

On February 2, 2017 Cisco announced a major issue affecting products from their routing, switching, security and server product lines. Reference Tables A through D below for a full list of affected products and part numbers.

Continue reading

Meraki does it again! Meraki is no longer just simplifying networking; they are on a mission to simplify IT as a whole. On Tuesday, September 13, 2016 Meraki announced the launch of a brand new product line; Security Cameras.  Just like all things Meraki, the MV series is plug and play, requires no additional on-premise hardware and is 100% cloud managed. This means no more network video recorder (

Continue reading
1
  • There are no suggestions because the search field is empty.

Latest Tweets